7KW Wall-mounted AC Charging Pile

Our company's 7KW wall-mounted AC charging pile is a charging device developed to meet the charging needs of new energy vehicles, which to be used in conjunction with the on-board charger of electric vehicles to provide charging services for electric vehicles. This product is easy to install, compact in size, simple to operate fashionable in appearance, card swiping/charging, fast and efficient; multiple all-round safety protection functions (short circuit protection, leakage protection, emergency stop protection, overcurrent, overtemperature protection, overvoltage protection, IP54 grade dust and water resistance, grounding protection) automatically cut off power after charging, protecting vehicle safety.

1.Plug and play operation process for each owner to park Lock the car - connect the charging gun - start charging (flashing light) Come and charge when you come◇, leave when it's done, completely insensitive

2. Slider to start operation process ◇Owner plug - Owner swipes authorization card - Start charging (flashing light)

Technical parameters

Product features

1) Equipped with a 4.3-inch display screen and LED status indicator, allowing for a clear of the charging process.

2) Capable of online communication via Ethernet/4G network, enabling real-time control and payment functions.

3) Comprehensive system protection: overvoltage, undervoltage protection, overcurrent protection, short circuit protection, leakage protection, overtemperature protection, lightning protection, ensuring safe and reliable product operation.4) Data storage and fault identification.

5) Precise power metering and identification function, enhancing user confidence.

6) The overall structure is designed with rain and dust, with an IP54 protection level, suitable for both indoor and outdoor

environments, and widely used in domestic and foreign environments.

7) Easy to install operate, and maintain.

8) Safe and anti-theft.

Installation Environment Requirements

1) This charging pile is an indoor and outdoor universal charging pile, which meets the IP54 protection level and can installed outdoors.

2) Please ensure that the ambient temperature is within the range of -30°C~ 50°C.

3) The installation location must exceed an altitude of 2000 meters.

4) There must be no severe vibration or flammable and explosive materials near the installation site.

5) The location must not be in a low-lying area or an area prone to waterlogging.

6) The installation of the pile must be supported by a wall. If there is wall support, it is recommended to use special floor pillars for installation and fixing.

7) When installing the pile, ensure that the pile is vertical and that the reference data for height of the charging pile from the ground (1.3-1.5 meters) is maintained.

Installation method

1) The reference data of the height of the charging pile from the ground (1.3-1.5 meters)2) Mark the position of the mounting hole on the back plate on the wall according to the position of the mounting hole on the back plate.

Use an impact drill to punch (Φ8*65), and then put in M8*60 plastic expansion tubes,

and tighten the screws through the hanging plate.

3) The equipment equipped with input cables from the factory, if you need to extend the length of the input cable,

please extend the connection according to the correct cable method according to the wiring identification connect three cables (fire line L, zero line N, grounding line PE) to the terminal board,

and complete the wiring; (Since the equipment current is large, extension should ensure reliable connection);

4) To prevent the risk of electric shock, the equipment should ensure that the input ground wire is firmly fixed.